Comparisons

CHANCS CSB125 vs Skil 5480-01

You are here: Compare Circular Saws >> Cheap Circular Saws >> CHANCS CSB125 vs Skil 5480-01
CHANCS CSB125Skil 5480-01
Title Mini Electric Motor 775 DC Motor 12V/24V With B10 Drill Chuck And Seat Mounting Bracket Mini Table Saw for Cutting/PolishingSkil 5480-01 13 Amp 7-1/4-Inch Circular Saw Kit
Model CHANCS
CSB125
Skil
5480-01

Basic Info

Suggested Price $27.90$73.99 ($0.40 / oz)
Sale Price Check Price*Check Price*
Release Aug 2015Sep 2012

Overview

Top Features
  • 1.This is a DIY combination of motor, bracket and B10 drill chuck,can be used with a saw blade to become a mini saw.
  • 2.The motor is with ball bearing, large torque, low noise, built-in cooling fan,durable and long service life.
  • 3.The specification of motor:Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm.
    The specification of bracket: Length: 50mm,Width: 52mm,Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm.
  • 4.Application:Hand tools,garden tools, power tools,shredder, sprayer, small cutting machine, small table saw.
  • 5.Package: 1PCS x DC Motor, 1PCS x Bracket, 1PCS x B10 Drill Chuck, 2PCS x Screws, 2PCS x Matching Hardware Tools.
  • The product is 7-1/4" 13A Circle Saw
  • Easy to use
  • The product is manufactured in China
  • The durable ball bearing motor construction gives the saw a longer life
  • 2-point Line of Sight allows users to make more accurate cuts
  • The foot is 20-percent larger than the previous generation guaranteeing more stability and control when making cuts
  • A rear lever depth-adjustment assures accurate cut depth in material

Reviews

Walmart Rating5.0 (out of 1 reviews)4.7 (out of 43 reviews)
Latest Reviews

Actually with it
Rating: 5
My husband had no complaints. He is picky about where he buys his tools. He is a brand name and where sold buyer. Did you know that some tools are made almost identical , but cheaper, in the factory, for some stores( like Walmart)?
by Catherine on 2020-07-13T17:00:00

User friendly, works well.
Rating: 5
I like this saw. It has a lot of features that makes it easy to use. Power, spindle look, sawdust blower, ease of adjustment,and power on light to name a few.
by Lewis on 2017-01-11T16:00:00

I sure I will die before this saw does.
Rating: 5
A decade or two ago I purchased a Skill Circular saw and have abused it a bunch. The latest was when I put a concrete blade on it and cut up a slap to make stepping stones. It still functions, but makes a little bearing noise when I release the trigger. So, I purchased another one and put a 40 tooth blade in it and love the way it cuts. Thanks for build tools I can rely on...!
by SkunkvilleJunker on 2017-03-06T16:00:00

A cut above!
Rating: 5
I have been using this circular saw for a few months, and it fits the bill of this DIY guy. It cuts clean, is light weight yet sturdy. I am well pleased and I have no doubt that I will get years of good service from this saw. I definitely recommend it and I would buy it again.
by Volfan on 2016-12-31T16:00:00

good tool
Rating: 5
I am new at all this but as far as I can tell this is a GREAT tool. It is very easy to use and leaves a clean cut. I have been useing it to remodel my house and the only complaint I have is that I think the cord is too short (thats why they make extention cords, I know). I dont know if they are all like that or not because this is the first one I have ever bought.
by Pxxxxx on 2009-02-20T16:00:00

What you expect from Skil
Rating: 5
My old SkilSaw died after nearly twenty years. I didn't need to shop other makes and am completely satisfied with my new one. For every job I do around the house, this is what I need.
by MaadMaax on 2009-02-04T16:00:00

A great gift
Rating: 5
I purchased the product for my husband for Fathers day. He used it Friday for the first time he was well pleased with the way it handled and the way it cut. I made a great choice.
by fluff1 on 2009-07-07T17:00:00

EZ to use
Rating: 5
As a first time user of a circular saw, I was a bit apprehensive. I read several safety and how-to-articles. I had no trouble at all in attaching the blade that came with it. The push lock tab held everything in place with no movement. In minutes I was ready. I first made a few practice cuts on the end of a 2 x 4 and found it to be very easy. I had a little trouble at first holding it , but soon it became second nature. On to tackling the job at hand which was replacing the edge of the roofline. This amounted to cutting out some sections of shiplap which also required setting the cut depth carefully so as not to cut the rafter tails and facia. I did so without a scratch! Then I had to cut out some rotten sections of a couple of the rafter tails. Not wanting to remove the sheathing on the roof, I decided to just trim off the rotted section near the plate and butt join the new tails. Nearly perfect fit, it was tight enough, I would not even had to have use screws, but I did anyway using an impact driver. Next called for cutting off a length of rotted facia requiring a 45 degree bevel cut on the end. I used a speed square as a guide for the saw foot. Perfect cut, first time! Saw handled nicely,was fairly light, and I could do so with one hand if necessary although it is not recommended. Only complaints are the markings for adjustments are hard to see, and not completely accurate. The bevel adjustment is a little tricky and has a tendancy to stick, that is, the movement is not all that smooth and takes a little fiddling to get the settings accurate. The blade that comes with the saw is not the best, but it will do. I will purchase a better quality blade.
by james92026 on 2016-05-15T17:00:00

I love this saw!
Rating: 5
My thirty-plus year old Black & Decker saw quit on me in the middle of a deck building project and I needed a replacement fast. This Skil saw looked like the best similar product among the various models that I shopped. I liked this one much better than my old B&D saw. It is lighter, easier to handle and line up for the cut, and it cut through the 2 x 4's like butter! I'm looking forward to more projects with this saw!
by gobluekuz on 2013-08-23T17:00:00

Excellent power for the price
Rating: 5
I bought this saw for small projects around the house. I wanted one that had enough power to do the job (cutting boards, fence rails, decking, etc.) but didn't break the bank. This saw certainly has the power for the job and it was relatively inexpensive. It is well-made and seems to be very durable.
by ZackAttack on 2013-09-03T17:00:00

Replacement saw
Rating: 4
Great saw. Been using SKIL for a while now and needed to replace an older circ saw from another brand and this one fit the bill. My only concern was that it didn.t come with a lefty option but hey not many do!
by Mojo Low on 2020-08-10T17:00:00

All Features

Depth AdjustmentYes
Corded Tool TypeCircular Saw
Included AccessoriesAllen Key/Wrench,Blades
Product Depth (in.)9.5
Bevel Capacity51.5
Cordless/ CordedCorded
Manufacturer Warranty3 Year Manufacturer's Warranty
Blade LocationRight
Returnable90-Day
Amperage (amps)13
Saw Drive TypeSidewinder
Tools Product TypePower Tool
Power Tool FeaturesDepth Adjustment,Keyless Blade Change,Spindle Lock
Product-Weight (lb.)7lb
Maximum Speed (rpm)5000
Color FamilyGreen
Cord Length (ft.)6
Product Height (in.)9.5
Product Width (in.)12
Maximum Cut Depth @ 90 Deg.2.438
Construction MaterialAcrylonitrile Butadiene Styrene (ABS)
Blade Diameter (in.)7-1/4
Cuts ThroughWood
Maximum Cut Depth @ 45 Deg.1.875
ConditionNew
Blade Diameter7-1/4
releaseAug 2015Sep 2012
Included Componentsbare-tool
Batteries Included?No
Power Sourcecorded-electric
Voltage120 volts
Certificationcertified frustration-free
Item Weight11.5 pounds
Horsepower2.30
Item model number5480-01
Item Package Quantity1
Batteries Required?No
Warranty Description30 day money back guarentee, 1 year manufactuer warranty
Size5/8"

More Information

View Details & Price*View Details & Price*

Related Comparisons

CHANCS CSB125 vs PORTER-CABLE PCE310
CHANCS CSB125 vs PORTER-CABLE PCC660B
CHANCS CSB125 vs Makita XSL08PT
CHANCS CSB125 vs Toucan City XSL08PT
CHANCS CSB125 vs Toucan City XSL08PT
CHANCS CSB125 vs CLL XSL08PT
Skil 5480-01 vs WEN CT1065
Skil 5480-01 vs DEWALT DCS575B
Skil 5480-01 vs SKILSAW SPT77W-01
Skil 5480-01 vs DEWALT DCS571B
Skil 5480-01 vs DEWALT DCS577B
Skil 5480-01 vs DEWALT DCS570P1

Not interested in the products compared on this page? Simply go back to our main article to start a new comparison between other circular saws now!

* affiliate links