Comparisons

Craftsman CMES500 vs Skil 5480-01

You are here: Compare Circular Saws >> Cheap Circular Saws >> Craftsman CMES500 vs Skil 5480-01
Craftsman CMES500Skil 5480-01
Title CRAFTSMAN 7-1/4-Inch Circular Saw, 13-Amp (CMES500)Skil 5480-01 13 Amp 7-1/4-Inch Circular Saw Kit
Model Craftsman
CMES500
Skil
5480-01

Basic Info

Suggested Price $74.84$73.99 ($0.40 / oz)
Sale Price Check Price*Check Price*
Release Jan 2019Sep 2012

Overview

Top Features
  • High performance motor runs at 5, 300 RPM's fast cuts
  • 71/4 in. 18T Carbide tipped blade for improved cut performance
  • Spindle lock for quick and easy blade changes
  • 45 Degree bevel capacity for accurate angle cuts
  • Contoured overmolded handle for added comfort during use
  • Material type: aluminum, steel
  • 3 Year Limited Warranty, refer to "Warranty & Support" section below for full details
  • The product is 7-1/4" 13A Circle Saw
  • Easy to use
  • The product is manufactured in China
  • The durable ball bearing motor construction gives the saw a longer life
  • 2-point Line of Sight allows users to make more accurate cuts
  • The foot is 20-percent larger than the previous generation guaranteeing more stability and control when making cuts
  • A rear lever depth-adjustment assures accurate cut depth in material

Reviews

Walmart Rating5.0 (out of 1 reviews)4.7 (out of 43 reviews)
Latest Reviews


Rating: 5

by Marc on 2020-05-03T17:00:00

User friendly, works well.
Rating: 5
I like this saw. It has a lot of features that makes it easy to use. Power, spindle look, sawdust blower, ease of adjustment,and power on light to name a few.
by Lewis on 2017-01-11T16:00:00

I sure I will die before this saw does.
Rating: 5
A decade or two ago I purchased a Skill Circular saw and have abused it a bunch. The latest was when I put a concrete blade on it and cut up a slap to make stepping stones. It still functions, but makes a little bearing noise when I release the trigger. So, I purchased another one and put a 40 tooth blade in it and love the way it cuts. Thanks for build tools I can rely on...!
by SkunkvilleJunker on 2017-03-06T16:00:00

A cut above!
Rating: 5
I have been using this circular saw for a few months, and it fits the bill of this DIY guy. It cuts clean, is light weight yet sturdy. I am well pleased and I have no doubt that I will get years of good service from this saw. I definitely recommend it and I would buy it again.
by Volfan on 2016-12-31T16:00:00

good tool
Rating: 5
I am new at all this but as far as I can tell this is a GREAT tool. It is very easy to use and leaves a clean cut. I have been useing it to remodel my house and the only complaint I have is that I think the cord is too short (thats why they make extention cords, I know). I dont know if they are all like that or not because this is the first one I have ever bought.
by Pxxxxx on 2009-02-20T16:00:00

What you expect from Skil
Rating: 5
My old SkilSaw died after nearly twenty years. I didn't need to shop other makes and am completely satisfied with my new one. For every job I do around the house, this is what I need.
by MaadMaax on 2009-02-04T16:00:00

A great gift
Rating: 5
I purchased the product for my husband for Fathers day. He used it Friday for the first time he was well pleased with the way it handled and the way it cut. I made a great choice.
by fluff1 on 2009-07-07T17:00:00

EZ to use
Rating: 5
As a first time user of a circular saw, I was a bit apprehensive. I read several safety and how-to-articles. I had no trouble at all in attaching the blade that came with it. The push lock tab held everything in place with no movement. In minutes I was ready. I first made a few practice cuts on the end of a 2 x 4 and found it to be very easy. I had a little trouble at first holding it , but soon it became second nature. On to tackling the job at hand which was replacing the edge of the roofline. This amounted to cutting out some sections of shiplap which also required setting the cut depth carefully so as not to cut the rafter tails and facia. I did so without a scratch! Then I had to cut out some rotten sections of a couple of the rafter tails. Not wanting to remove the sheathing on the roof, I decided to just trim off the rotted section near the plate and butt join the new tails. Nearly perfect fit, it was tight enough, I would not even had to have use screws, but I did anyway using an impact driver. Next called for cutting off a length of rotted facia requiring a 45 degree bevel cut on the end. I used a speed square as a guide for the saw foot. Perfect cut, first time! Saw handled nicely,was fairly light, and I could do so with one hand if necessary although it is not recommended. Only complaints are the markings for adjustments are hard to see, and not completely accurate. The bevel adjustment is a little tricky and has a tendancy to stick, that is, the movement is not all that smooth and takes a little fiddling to get the settings accurate. The blade that comes with the saw is not the best, but it will do. I will purchase a better quality blade.
by james92026 on 2016-05-15T17:00:00

I love this saw!
Rating: 5
My thirty-plus year old Black & Decker saw quit on me in the middle of a deck building project and I needed a replacement fast. This Skil saw looked like the best similar product among the various models that I shopped. I liked this one much better than my old B&D saw. It is lighter, easier to handle and line up for the cut, and it cut through the 2 x 4's like butter! I'm looking forward to more projects with this saw!
by gobluekuz on 2013-08-23T17:00:00

Excellent power for the price
Rating: 5
I bought this saw for small projects around the house. I wanted one that had enough power to do the job (cutting boards, fence rails, decking, etc.) but didn't break the bank. This saw certainly has the power for the job and it was relatively inexpensive. It is well-made and seems to be very durable.
by ZackAttack on 2013-09-03T17:00:00

Replacement saw
Rating: 4
Great saw. Been using SKIL for a while now and needed to replace an older circ saw from another brand and this one fit the bill. My only concern was that it didn.t come with a lefty option but hey not many do!
by Mojo Low on 2020-08-10T17:00:00

All Features

Spindle Lockyes
Paint CodeN
Vendor Number43945
Maximum Speed5300-rpm
Certificationsul-listed
Store Availability Rank06
Shipping CodeY
Feature 6 Text6k1p2p
Corded or Cordlesscorded
Web Order Multiple1
Weighted RatingAccurate cuts: 45° bevel capacity for accurate ang
Arbor Size5/8-in.
Amps13-amps
Bevel Capacity45-deg.
Blade Changekeyless
Diameter7-1/4-in.
Proposition 65 WarningCancer and Reproductive Harm
Vendor NameBLACK AND DECKER US INC
Laser Guideno
Unit Velocity CodeB
Feature 5 TextAdded comfort: contoured over-molded handle for ad
Electric Brakeno
Tool Weight8-lb.
DIFM Service CodeN
Volts120-volt
Depth Adjustmentyes
Maximum Cutting Depth at 90 Degrees2-in.
Warranty CodeN
Blade Locationright
Search FieldCraftsman 120 volt 13 amps 7-1/4 in. Corded Circul
What\u0027s Included(1) CMES500 Circular Saw, (1) 7-1/4-in. Stainless
releaseJan 2019Sep 2012
Included Componentsbare-tool
Batteries Included?No
Power Sourcecorded-electric
Voltage120 volts
Certificationcertified frustration-free
Item Weight11.5 pounds
Horsepower2.30
Item model number5480-01
Item Package Quantity1
Batteries Required?No
Warranty Description30 day money back guarentee, 1 year manufactuer warranty
Size5/8"

More Information

View Details & Price*View Details & Price*

Related Comparisons

Craftsman CMES500 vs PORTER-CABLE PCE310
Craftsman CMES500 vs PORTER-CABLE PCC660B
Craftsman CMES500 vs Makita XSL08PT
Craftsman CMES500 vs Toucan City XSL08PT
Craftsman CMES500 vs Toucan City XSL08PT
Craftsman CMES500 vs CLL XSL08PT
Skil 5480-01 vs WEN CT1065
Skil 5480-01 vs DEWALT DCS575B
Skil 5480-01 vs SKILSAW SPT77W-01
Skil 5480-01 vs DEWALT DCS571B
Skil 5480-01 vs DEWALT DCS577B
Skil 5480-01 vs DEWALT DCS570P1

Not interested in the products compared on this page? Simply go back to our main article to start a new comparison between other circular saws now!

* affiliate links