Comparisons

General International MS3005 vs RYOBI TS1345L

You are here: Compare Miter Saws >> General International MS3005 vs RYOBI TS1345L
General International MS3005RYOBI TS1345L
Title GENERAL INTERNATIONAL 10" Compound Sliding Miter Saw - 15A Dual Slide Rail Chop Saw with 0-45° Bevel & Laser Alignment System - MS3005Ryobi 14-Amp 10 in. Compound Miter Saw in Green
Model General International
MS3005
RYOBI
TS1345L

Basic Info

Suggested Price $188.40$158.12
Sale Price Check Price*Check Price*
Release Aug 2015Jul 2019

Overview

Top Features
  • PRECISION CUTTING - The advanced laser alignment system ensures accuate cuts everytime!
  • HIGH-POWERED MOTOR - Comes standard with a powerful 1800 watt, 120V~60HZ, 15 amp motor.
  • VERSITILE DESIGN - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Cuts wood, plastic and aluminum (with correct blade). Cutting Capacity: Cross cut at 90 degrees: 3” x 12" (80 x 300 mm), Miter cut at 45 degrees: 3" x 8" (80 x 200 mm), Miter and Bevel compound cut at 45° and 45°: 1.5" x 8" (40 x 200 mm)
  • BLADE CHANGES MADE EASY - The push-button shaft lock mechanism allows for simple, quick blade changes.
  • PARTS INCLUDED - Dust Bag, Hold Down Clamp, Table Side Extension Bars, Rear Stabilization Bar and 10-Inch Saw Blade with Carbide tipped teeth
  • Machined cast-in miter scale for accurate table alignment
  • Horizontal "D" handles for improved comfort
  • Heavy duty 14 Amp motor for a variety of cuts
  • 9 ball detent stops at the most common miter cutting angles
  • Electric brake stops the blade in seconds

Reviews

Walmart Rating4.3 (out of 10 reviews)5.0 (out of 2 reviews)
Latest Reviews

Love the features on this saw
Rating: 5
This saw had features most others charge more for. Works well at a terrific price!
by Srieves on 2020-08-11T17:00:00

No frills, simple and heavy, great purchase.
Rating: 5
On a budget, I purchased this mitre saw to replace a 7" Delta bought back in the 80's or 90's. I hated that Delta from day one. This saw is perfect for an occasional carpenter like me. I bought the tooth lock model ( stay away from ball-bearing lock is what the Delta taught me ) and it came with design upgrades not seen in pics. This saw is undervalued, and 10" blade is perfect as 12" is getting too large. It is soo much quieter than my Delta, smooth in all operations. The beauty of this saw is that it is NOT high-tech, rather simple heavy-duty. It has a larger footprint than it's high-tech rivals but I do not care. The price is so attractive that I also purchased the mating stand, which works awesome see that review. No more shall I bend over to work, no more making custom stand off's to support long timber. No more headache's when mitering lumber. Already looking at purchasing other products from this MFR, for no-frills woodworking tools.
by delamite on 2020-05-07T17:00:00

Five Stars for General International
Rating: 5
Great product and a great price. This product is worth every penny I spent. I would recommend this company and their products. Spend the extra money and get the General International miter saw stand to go with it. Total cost for the MS3005 model with stand: ($99 + $55). This included shipping for free. I will be buying more products from General International in the future!!
by JohnnyMac5000 on 2018-09-28T17:00:00


Rating: 5
Very good tool for the price,laser piece needs to be readjust but still a great deal for small jobs.
by Torres on 2018-06-14T17:00:00


Rating: 3
Good saw, not great but good. Two problems. 1. Never could get laser adjusted to right spot but don't really need it. 2. The vacuum port seems to be worthless(may work ok with industrial type vacuum system, but would not work with my shop vac.) Even tried moving vac line down to back side of the cut but all the saw dust still blew out the back of the saw.
by doodah48 on 2019-03-19T17:00:00


Rating: 3
thankfully the stock holding clamp is removable, interferes with angle cutting. dont forget to pull out and lock the knob on the right, or your saw will lock into place on each cut. comparable to other light to mid duty saws ive used on job site like hitachi. wish it would tilt both directions. has plastic knobs on the lock downs. the blade delivered with saw is a rough cut blade take your time on trim cutting or change to a higher tooth blade. otherwise i like it just fine.
by will on 2019-08-04T17:00:00

General International Ms3005 10" Sliding Miter Saw
Rating: 2
I purchased this saw to replace a 20+ years old Craftsman miter saw that finally died. This saw seems cheaply made with lots of plastic adjustment knobs that will likely fail over time with heavy use. It comes with a really bad bare bones manual that doesn't mention the laser at all and is somewhat obscure about many aspects of use. More importantly it won't cut completely through a piece of wood leaving approximately 1/8 - 3/16 at the bottom of the cut, I tried looking online for some way to adjust the blade but couldn't find any fix. Perhaps if you're on a budget and do weekend DIY projects this saw might fit your needs. I wouldn't recommend this saw.
by Laurie on 2019-06-27T17:00:00


Rating: 5

by jimjam on 2018-06-25T17:00:00


Rating: 5

by J2 on 2019-08-04T17:00:00


Rating: 5

by bob on 2020-08-22T17:00:00


Rating: 5
I'm very satisfied with the quality of the product and how fast it was delivered! Like real proffesionals
by Preston on 2020-10-27T17:00:00


Rating: 5

by WorkshopPro on 2019-11-08T16:00:00

All Features

Dust Collection MethodBag
Power Tool FeaturesElectric Brake,Laser Guide,No Tool Blade ChangeNo Additional Features
45 Degree Crosscut Capacity Maximum1.5" x 8"
Bench & Stationary Tool TypeSlide Miter Saw
Maximum Degree Miter Cuts - Right4550
Bevel TypeSingleSingle
PortabilityBench
Miter Saw TypeSliding CompoundSliding Compound
90 Degree Crosscut Capacity Maximum - Left3" x 8"
Amperage (amps)1515
Cordless/ CordedCordedCorded
Maximum Cutting Thickness (in.)3.53.5
Arbor Size0.631"
Product-Weight (lb.)2934.5lb
Returnable180-Day90-Day
Color FamilyRedOrange
Maximum Speed (rpm)4400
ConditionNewNew
Cord Length (ft.)610
Blade Diameter (in.)1010
Tools Product TypePower ToolPower Tool
90 Degree Crosscut Capacity Maximum - Right3" x 8"
Maximum Degree Miter Cuts - Left4550
Construction MaterialSteelAluminum
Included AccessoriesLaser GuideBlades
releaseAug 2015Jul 2019
Certifications and ListingsETL Listed
Cuts ThroughAluminum,Metal,PVC,Plastic,Steel,Wood
Product Width (in.)21
Product Height (in.)15
Dust collection typeBag
Manufacturer Warranty3 Year Limited Manufacturers Warranty
Power SourceElectric
Corded Tool TypeMiter Saw
Product Depth (in.)23

More Information

View Details & Price*View Details & Price*

Related Comparisons

General International MS3005 vs DEWALT DWS709
General International MS3005 vs DEWALT DWS716XPS
General International MS3005 vs DEWALT DWS716XPS
General International MS3005 vs Delta 26-2251
General International MS3005 vs Milwaukee 6955-20
General International MS3005 vs RYOBI P553
RYOBI TS1345L vs Metabo HPT C10FSHCT
RYOBI TS1345L vs DEWALT DHS790AT2
RYOBI TS1345L vs Delta S26-262L
RYOBI TS1345L vs TACKLIFE PMS03A
RYOBI TS1345L vs DEWALT DW715R
RYOBI TS1345L vs DEWALT DWS779

Not interested in the products compared on this page? Simply go back to our main article to start a new comparison between other miter saws now!

* affiliate links