Comparisons

Delta 40-694 vs WEN 3921

You are here: Compare Scroll Saws >> Variable Speed Scroll Saws >> Delta 40-694 vs WEN 3921
Delta 40-694WEN 3921
Title Delta Power Tools 40-694 20 In. Variable Speed Scroll SawWEN 3921 16-inch Two-Direction Variable Speed Scroll Saw
Model Delta
40-694		WEN
3921

Basic Info
Suggested Price $332.79$110.75
Sale Price Check Price*Check Price*
Release Dec 2014Jan 2019

Overview
Top Features
  • Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
  • Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
  • Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
  • Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
  • On/Off switch, electronic variable speed dial, flexible dust blower and blade-tensioning lever are all conveniently located up front on the arm for easy accessibility
  • On-tool blade storage area provides neat, organized protection for scroll saw blades, includes 2 straight blades
  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • Variable speed goes from 400 to 1600 strokes per minute
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

Reviews
Walmart Rating5.0 (out of 1 reviews)4.2 (out of 39 reviews)
Latest Reviews


Rating: 5
Same as the Dewalt 788 except the upper arm can lock in the up position while re positioning your work piece and feeding the blade through. Not free shipping! You can buy it at home depot for $399
by Wingnutt70 on 2018-01-06T16:00:00

Value
Rating: 5
Value. Its exactly the inexpensive, but quality tool that you need to start with.
by Roman on 2020-07-28T17:00:00

100% Satisfaction
Rating: 5
Nothing bad to report
by Clifford on 2020-07-19T17:00:00

Very pleased
Rating: 5
Lightweight, easy set up - ready to use out of the box. Quality materials.
by Jay on 2020-10-09T17:00:00

Great scroll saw
Rating: 5
Good saw for any one even for first time scroll saw users i have been scroll sawing for ten years and love the wen scroll saw easy to use and was a very good deal for a low cost saw .I would recommend it to any one easy blade change very quiet and fun to use .
by yumascroller on 2020-06-14T17:00:00


Rating: 4
I like everything about it and no dislikes so far.
by Carl on 2020-08-21T17:00:00

Good deal for the money.
Rating: 4
Got this saw as a first time scroller and was really pleased with the results. Did a lot of cutting on 3/4" oak and it did just fine. It's a little "jumpy" if you don't have it well anchored, but does fine if you do. Love the 2-direction blade feature. It really saved the day on my project as I was able to cut 22" pieces in continuous cut. I would caution not to over-tension the arm. I broke an ear off the lower blade holder, but WEN replaced it under warranty quickly and with no hassle. It's not the most convenient for using plain end blades, but for the money it's worth a little hassle. Pin end blades are a breeze.
by Rforer on 2017-03-05T16:00:00

Cuts good for the price.
Rating: 4
The 2 direction blade without having to change anything other than the direction of the blade makes this saw nice for the price. It is like all WEN products i have tried though - under powered, but knowing that going into the purchase you should not be surprised by it or give a bad rating cause it is common knowledge about these products, if you take your time it cuts great with no problems at all.
by Sebrun on 2017-03-17T17:00:00

Jim
Rating: 4
I think this product is worth the money i would recommend it to a friend
by bassinman on 2020-10-20T17:00:00


Rating: 4
good saw for small work ,seems to have no problems so far
by MargeD on 2020-04-08T17:00:00


Rating: 1
Arrived quickly and intact. Works as described.
by Maeve on 2020-10-15T17:00:00

All Features
Length Of Stroke (Inches)0.75
Hold Down Foot IncludedYes
Chuck TypeKeyless
Depth (Inches)39
Weight (lbs.)70
Guide(s)No
Maximum Metal Cutting Capacity (Inches)2.125
Maximum Depth of 45 Degree Cut (Inches)1.625
No Tool Blade ChangeYes
Variable SpeedYes
CSA Safety ListingNo
Dust CollectionNo
Dust BlowerYes
Table Tilt Range Left (Degrees)45
Built-In LightNo
Speed Range Low (SPM)400
Dust ChuteNo
Length (Inches)39
Blade TypeStraight
Chuck Key StorageNo
ETL Safety ListingNo
Table Tilt Range Right (Degrees)45
Adjustable ShoeYes
Speed Range High (SPM)1750
UL Safety ListingYes
Maximum Depth of 90 Degree Cut (Inches)2.125
Height (Inches)19
Package ContentsScroll saw, 2 straight blades
Maximum Wood Cutting Capacity (Inches)2.125
Width (Inches)16
Max. Throat Width/Depth (Inches)20
Amps (Amps)1.3
releaseDec 2014Jan 2019
Corded Tool TypeSpecialty Saw
Blade Length (in.)5
Product-Weight (lb.)27.5lb
Product Width (in.)11
Construction MaterialCast Metal
Tools Product TypePower Tool
Cord Length (ft.)6.5
Certifications and ListingsCSA Certified
Color FamilyBlack
Cuts ThroughWood
Cordless/ CordedCorded
Returnable90-Day
Amperage (amps)1.2 A
ConditionNew
Included AccessoriesBlades
Product Depth (in.)24
Maximum wood thickness (in.)2
Power Tool FeaturesKeyless Blade Change,No Tool Blade Change
Manufacturer WarrantyTwo-year limited warranty
Product Height (in.)13
Power SourceElectric

More Information
View Details & Price*View Details & Price*

Related Comparisons
Delta 40-694 vs DEWALT BT8007
Delta 40-694 vs General International BT8007
Delta 40-694 vs DEWALT DW788
Delta 40-694 vs SKILSAW 3335-07
Delta 40-694 vs WEN 3922
Delta 40-694 vs DEWALT 3335-07
WEN 3921 vs Genesis GSS160
WEN 3921 vs Proxxon 37088
WEN 3921 vs Rockwell RK7323
WEN 3921 vs RYOBI SC165VS
WEN 3921 vs RIKON Power Tools 10600VS
WEN 3921 vs General International EX-21

Not interested in the products compared on this page? Simply go back to our main article to start a new comparison between other scroll saws now!

* affiliate links