Top Features |
- Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM
- Large cutting capacity for up to 8″” crown molding (nested), 6-1/2″” baseboard (vertical), and 15″” crosscut at 90°
- Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts
- Independent laser indicates line-of-cut whether blade is turning or not, with on/off switch and micro-adjustments for precise “”left-of-blade”” or “”right-of-blade”” cutting
- Exclusive 6 linear ball bearings engineered to deliver smooth, solid, and adjustment-free “”dead-on”” accurate cuts
- Exclusive 5-1/2″” tall dual sliding fence system features versatile upper and lower fence adjustments for more precise miter and bevel cuts
- Patented retractable rear guard and triple gear system for increased vertical cutting capacity
- Miters 0°-52° left and 0°-60° right, with positive stops at 0°, 15°, 22.5°, 31.6° and 45° (left and right)
- Bevels 0°-45° (left and right) with positive stops at 0°, 22.5°, 33.9° and 45° (left and right)
- Dual rear-handle bevel lock is easily accessible, with front and top facing scales for more precise bevel adjustments
- Electronic speed control maintains constant speed under load for smoother, higher quality cutting
- Soft start feature for smooth start-ups
- Easy one-touch miter lock for accurate adjustments and increased efficiency
- Replaceable stainless steel miter scale features easy-to-read markings
- Ergonomic rubberized horizontal D-handle design with oversized trigger switch for better fit and added comfort
- Large precision machined aluminum base supports material for more efficient cutting
- Double-jointed vertical vise can be installed on either the left or right side of the base for more versatile positioning
- See-through blade guard system for greater visibility of the line of cut
- Rubberized feet help tool remain stationary
- Large adjustable levers for fast and easy fence adjustments
- Fully enclosed bottom throat plate for a cleaner work surface
- 60T Carbide Tipped Blade (A-93712)
- Vertical Vise (122854-6)
- Dust Bag (122852-0)
- Triangular Rule (762001-3)
- Wrench #2.5 (783208-8)
- Wrench #13 (782232-8)
- LS1016LX5
- LS1216LX4
- LS1016L
- LS1016
- LS0714
- LS1040F
- LS1221
- LS1040
- Four-steel rail sliding system and six linear ball bearings deliver adjustment-free dead-on cuts
- Exclusive 5-1/2-inch-tall dual sliding fence system features upper and lower fence adjustment
- Powerful 15-amp direct-drive motor requires less maintenance than belt-driven saws
- Independent micro fine laser with on/off switch indicates line of cut left or right of blade
- Cuts 8-inch crown molding (vertically nested), 6-1/2-inch baseboard (vertical), and 15-inch crosscuts at 90 degrees
|
- Powerful 15.0 AMP motor for improved performance; 4,600 RPM
- Dual post compound pivoting arm
- Bevel cuts up to 45° to the left
- Miter cuts 0°-45° left and 0°-52° right
- Positive miter stops at 9 settings: 15°, 22.5°, 30°, 45°, right or left and 0° (90° cuts)
- Weighs only 27.3 lbs. for easy portability
- Precision machined aluminum base ensures accurate cuts
- Performs compound cutting operations
- Shaft lock for easy blade changes
- Socket Wrench (782212-4)
- 40T Carbide Tipped Blade (A-93669)
- Dust Bag (122852-0)
- Triangular Rule (762001-3)
- Vertical Vise (122536-0)
- LS1016LX5
- LS1216LX4
- LS1216L
- LS1016L
- LS1016
- LS0714
- LS1040F
- LS1221
- Features powerful 15 amp motor and dual post compound pivoting arm
- Provides a large capability with cuts 52 degrees right and 47 degrees left with 9 positive stops at 15, 22-1/2, 30, 45 degrees left or right and 0 degrees
- Durably designed with a machined aluminum base, dual aluminum base, dual slide rails and a carbide tip blade
- Saw includes vertical vise, blade, wrench and triangular rule
- Covered by 1-Year warranty
|