Comparisons

Husqvarna 967083301 vs SKILSAW SPT77W-01

You are here: Compare Circular Saws >> Cheap Circular Saws >> Husqvarna 967083301 vs SKILSAW SPT77W-01
Husqvarna 967083301SKILSAW SPT77W-01
Title Husqvarna K4000 Cut-N-Break Saw, OrangeSKILSAW SPT77W-01 15-Amp 7-1/4-Inch Aluminum Worm Drive Circular Saw
Model Husqvarna
967083301
SKILSAW
SPT77W-01

Basic Info

Suggested Price $1,825.00$168.89
Sale Price Check Price*Check Price*
Release Aug 2016

Overview

Top Features
  • Cutting depth max: 16", blade diameter max: 9"
  • Cost-efficient cutting method with the unique Cut-n-Break method you can work your way through the material step-by-step at a low tool cost
  • Exceptional cutting depth: The long body and double cutting blades allow you to make cuts up to 16" Deep
  • Perfect for flush cutting: The adjustable blade guard allows close cutting to walls and floors
  • Ergonomically designed rear handle: power cord inlet located underneath the handle enables ease of use and comfortable handling with hassle free operation
  • Lighter construction (1 pound lighter than SKIL SHD77), reduces user fatigue for less down time
  • Cut-ready depth of cut system helps with quick, accurate depth measurements
  • 51° bevel allows users to complete a wider variety of cuts
  • 15 Amp of power gives users the power to rip through more lumber in less time
  • The anti-snag lower guard provides smooth operation for small cut-off pieces

Reviews

Walmart Rating4.7 (out of 109 reviews)4.6 (out of 38 reviews)
Latest Reviews

Power is incredible, great features!
Rating: 5
I bought this saw to finish some projects around the house. Am I glad I did! It cuts through wood like it's butter! After struggling ripping boards with a circular saw, this is so easy! Great features and love the big wheels! They make moving the saw easy... from the garage...over curbs, sidewalks, in the grass... no problem. Handy storage of all the tools and accessories that come with it too. Very happy with this saw! Made building my backyard swing a dream!
by Jaimie S on 2020-08-08T17:00:00

Easy to use right out of the box
Rating: 5
I am very much a beginner woodworker with limited tablesaw experience, but I find this saw easy to set up and use. I have been able to get great quality cuts and the rack and pinion fence system is an absolute must have for me. It came fairly well dialed in right out of the box, but the riving knife needs a little adjustment, as it pinches the piece against the fence a little bit. My only criticism isn't even about the saw, but the mitre gauge that came with it. It's just not very substantial and pretty sloppy in the groove which made some of my cross cuts a little inaccurate. That being said, though, I know I'm just going to build a mitre sled and cross cut sled anyway, so I'm glad they didn't waste the money on an item I probably wouldn't use anyway.
by New Guy on 2020-08-03T17:00:00

Power - Precision - Skilsaw
Rating: 5
I own this saw now for about 6 month and honestly I have not found a thing I do not like about this saw. Quick and easy assemble after arrival and every part was securely packed up. I ran various materials thru the saw, from ripping 2by's to multiple sheets of ply on the job. This saw does not stop or slow down whatever you "throw" in its pass, even when pushing it hard. I am very pleased about the dust chute and the genius elbow to bucket idea. It works perfectly even on windy days on the job site. Something so simple makes a huge difference. The blade compartment is sealed off pretty good, so most of the saw dust flies into the bucket or sucked up by a vacuum/dust extractor when used. I found out that the big wheels on the stand really come in handy when rolling over rough terrain on the job site, in and out of the truck, and sometimes even stairs. Quick and easy access/ storage of the push stick. Pretty much all accessories are nicely stored in the base of the saw. I had to fix the factory alignment of the fence, but don't you have to do that with most saws?! The saw has a very small footprint when stored (upright position) compare to my other saws which I own and owned before. Smooth and quality rack and pinion fence system. Overall, I am very pleased with the saw, it is powerful and precise. I would definitely recommend this saw to anyone.
by AlexSpecht on 2018-12-08T16:00:00

Great table saw
Rating: 5
What's up guys Im one of the owners of Deadwood Revival Design and we make live edge furniture so using this table saw has been very useful to us. Right out of the box it was very minimal assembly and minor adjustments which is the same with any table saw. First time I used the saw was to rip a 3” thick slab of oak and it powered through it with ease. One of my favorite features is the stand which folds from storage position to operating positing smoothly. The rack and pinion fence adjustment is great and I feel like I don't need to check for square each time I adjust it like my last table saw. Overall this is a great table saw with many features and I would absolutely recommend having this as part of your arsenal.
by Deadwood Revival Design on 2018-03-14T17:00:00

Read many reviews before making the purchase.
Rating: 5
Very accurate out of the box, only needed minor adjustments. Has a lot of power and it slows the blade pretty quickly after turning it off. Also it is not too loud.
by Jasmine on 2020-10-09T17:00:00

Great Saw
Rating: 5
I purchased this saw because I wanted something portable with a wide rip fence. This saw has impressed me by how powerful the worm drive is. The fence is solid and easy to adjust. Blade adjustments are equally easy. I'm really enjoying using it. It is loud, so using ear plugs is advised.
by Dallen on 2020-07-26T17:00:00

Cuts through wood like “butter”...
Rating: 5
I had an old craftsman but this thing is in a completely different category. The ability to fold it and stand it up is great, the attachments all have a place so they don't get banged until when stored upright... and did I mention it cuts wood with almost no effort! I love that it comes with a push stick... the only way to make it better is to have an auto feeder with a remote control... or better yet, voice commands 😉 just joshing!
by SunNSurf on 2020-07-11T17:00:00

Great job site saw
Rating: 4
I bought this saw for home projects, as I'm remodeling my master bedroom, bathroom and trim throughout the house. I love that it's easy to move around since space is limited. The worm drive makes for powerful cuts. The wide gate makes for large rips. My only complaint is the rough table surface. It's a little sticky. Other than that. Super happy. Great buy.
by MikeD on 2020-07-21T17:00:00

Buy this saw!
Rating: 4
I hope you have a saw which is pretty right on for accuracy between the blade and the miter slot. Because you can't use the table to adjust it because the table has 6 other bolts besides the 4 trunnions bolts. You can adjust it using the arbor. The instructions don't tell you that. Other than that it's a great saw!
by stevesid on 2020-02-14T16:00:00

Will not cut a 90 deg edge on boards
Rating: 1
I purchased this saw on 11/27/18. At first I was amazed how powerful it was then after a couple years of use and fighting to get good cuts I finally realized the surface of the table saw is not flat at all. I am so upset with this saw right now I am planning to get rid of it as soon as I can and purchase a Dewalt or something better. I am so depressed with this saw and finding this out now, I know it's been a while but I could have sworn it was flat when I first got it. So either it has warped over the past two years or it was never really flat in the first place. I cannot get a 90 degree cut so it is very discouraging.
by tradxnet on 2020-08-29T17:00:00

Like a hot knife through butter.
Rating: 5
I've used many circular saws in my life. This blows them all out of the water! It's not light, and for one handed sawing, your arm will feel it at the end of the day, but it slides through lumber like butter. Can't believe I waited so long to buy it.
by M Miller on 2020-09-21T17:00:00

Quality of Skilsaw
Rating: 5
My last Skilsaw finally gave up the ghost.After 34 years of faithful service to me,I had bought it well used, I'm now 65, hopefully it will be as faithful for another 34 years and that I may be still using it if the Good Lord works it out for me! Thanks Skilsaw
by Will F on 2020-04-23T17:00:00

Go
Rating: 5
Still new. Seems to work well. Will update after a few months.
by Thanks on 2020-10-02T17:00:00

Great saw!
Rating: 5
Fantastic saw! It is tough and powerful enough to cut through building materials with ease.
by Insan0f1ex on 2020-09-24T17:00:00

Fantastic Saw
Rating: 5
I bought this Saw to replace the old one.. What a difference !
by on 2020-06-03T17:00:00

Skil wormdrive the absolute best for me
Rating: 5
I have used this saw for years, this about my 5th one over about 40 years of hard use in building houses and other projects. In my day it was known as a 'west coast saw'. Because of its weight. Eastern builders like little lightweight saws. But the quality, the life and the cut these dates produce are almost unequalled. I get tablesaw quality cuts in fine work. This saw loved the sight of a stack of wood!
by David on 2019-06-21T17:00:00

An Avid DIYer's Review
Rating: 5
great saw. tons of power and torque. It cuts through everything I've thrown at it. I'm 6' 8" with big hands and this thing fits like a glove. Almost like it crafted just for me. It's a wee bit hefty, but you can use that to work your way through whatever material you're cutting.
by LoneShade on 2019-07-22T17:00:00

Skills saws are the best on the marketplace
Rating: 5
Skills saws have been with me and my crews while I was working over my years working and never had problem just wore them out they got the jobs done and never gave out on us .
by Richard Flickinger on 2019-07-27T17:00:00

Absolutely Awesome Saw!
Rating: 5
Best saw I have used to date. Excellent torque and handling. Love this saw. If I ever buy another it will be the Mag 77 version. I 100% recommend this saw to anyone.
by Braeden on 2019-10-03T17:00:00

Everything went smoothly
Rating: 4
The only problem I found is that the specs show no specifications for a 100' extension cord.
by Skrimski on 2020-06-28T17:00:00

All Features

nope1
Assembled Product Dimensions (L x W x H)20.75 x 9.35 x 7.75 Inches
Featuresnumber of conductors: 3, item: worm drive skilsaw, depth of cut @ 45 deg.: 1-15/16", voltage: 120, depth of cut @ 90 deg.: 2-3/8", tool weight:, handle type: soft grip, bevel stops: variable, arbor size: diamond, tool length: 20-1/2", includes: carbide blade, blade wrench, features: 2-position saw hook for safe rafter placement, blade side: left, amps @ 120v: 15.0, shoe material: steel, blade dia.: 7-1/4", standards: culus, no load rpm: 4600, cord length: 8 ft., bevel capacity: 0 degrees to 45 degrees
Assembled Product Weight18.6 lbs
manufacturer.part.numberspt77w-01
releaseAug 2016

More Information

View Details & Price*View Details & Price*

Related Comparisons

Husqvarna 967083301 vs Makita XSL08PT
Husqvarna 967083301 vs Toucan City XSL08PT
Husqvarna 967083301 vs Toucan City XSL08PT
Husqvarna 967083301 vs CLL XSL08PT
Husqvarna 967083301 vs WEN CT1065
Husqvarna 967083301 vs DEWALT DCS575B
SKILSAW SPT77W-01 vs DEWALT DCS571B
SKILSAW SPT77W-01 vs DEWALT DCS577B
SKILSAW SPT77W-01 vs DEWALT DCS570P1
SKILSAW SPT77W-01 vs TACKLIFE TCS115A
SKILSAW SPT77W-01 vs Milwaukee 2631-20
SKILSAW SPT77W-01 vs WORX WX429L

Not interested in the products compared on this page? Simply go back to our main article to start a new comparison between other circular saws now!

* affiliate links